rmf_charging_schedule package from rmf_ros2 repormf_charging_schedule rmf_fleet_adapter rmf_fleet_adapter_python rmf_task_ros2 rmf_traffic_ros2 rmf_websocket |
|
Package Summary
Tags | No category tags. |
Version | 2.2.7 |
License | Apache License 2.0 |
Build type | AMENT_PYTHON |
Use | RECOMMENDED |
Repository Summary
Checkout URI | https://github.com/open-rmf/rmf_ros2.git |
VCS Type | git |
VCS Version | iron |
Last Updated | 2024-11-14 |
Dev Status | DEVELOPED |
CI status | No Continuous Integration |
Released | RELEASED |
Tags | No category tags. |
Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Package Description
Additional Links
Maintainers
- Grey
Authors
A simple node that takes in a yaml file that describes a schedule for charger usage in an RMF scenario. The node will watch the clock and publish the appropriate commands to change the chargers of the robots.
The format for the schedule looks like this:
"my_fleet_name":
"00:00": { "robot_1": "charger_A", "robot_2": "charger_B", "robot_3": "queue_A" }
"01:55": { "robot_1": "queue_B" }
"02:00": { "robot_3": "charger_A", "robot_1": "queue_A" }
"03:55": { "robot_2": "queue_B" }
"04:00": { "robot_1": "charger_B", "robot_2": "queue_A" }
The time format is "HH:MM"
where HH
ranges from 00
to 23
and MM
ranges
from 00
to 59
. Note that quotes are important because otherwise the yaml
format may confuse the meaning of the colon :
.
The schedule will cycle every 24 hours.
For each timestamp, only robots that are explicitly mentioned will have their dedicated charger changed. It is the responsibility of the schedule file author to make sure that two robots are never assigned the same charger at the same time. Failing to ensure this may cause traffic and task management to misbehave.
When run in simulation mode (--ros-args --use-sim-time
), the time 00:00
in
the schedule will correspond to t=0.0
in simulation time.
When run without sim time on, the hours and minutes will correspond to the local
timezone of the machine that the node is run on. To choose a specific timezone
instead of using the system’s local timzeone, use the --timezone
argument and
provide the desired TZ identifier
string.
It is advisable that you always put a 00:00
entry that indicates all of
the intended charger assignments at midnight. When the node is launched, it will
move through the schedule from the earliest entry up until the last relevant one
and issue an initial charger assignment message based on what the assignments
would have been if the schedule had run from 00:00
.
Changelog for package rmf_charging_schedule
2.2.7 (2024-11-15)
2.2.6 (2024-07-12)
2.2.5 (2023-12-22)
2.2.4 (2023-12-15)
- First release
Wiki Tutorials
Package Dependencies
Deps | Name |
---|---|
rclpy | |
rmf_fleet_msgs |
System Dependencies
Dependant Packages
Launch files
Messages
Services
Plugins
Recent questions tagged rmf_charging_schedule at Robotics Stack Exchange
rmf_charging_schedule package from rmf_ros2 repormf_charging_schedule rmf_fleet_adapter rmf_fleet_adapter_python rmf_task_ros2 rmf_traffic_ros2 rmf_websocket |
|
Package Summary
Tags | No category tags. |
Version | 2.7.2 |
License | Apache License 2.0 |
Build type | AMENT_PYTHON |
Use | RECOMMENDED |
Repository Summary
Checkout URI | https://github.com/open-rmf/rmf_ros2.git |
VCS Type | git |
VCS Version | jazzy |
Last Updated | 2024-06-17 |
Dev Status | DEVELOPED |
CI status | No Continuous Integration |
Released | RELEASED |
Tags | No category tags. |
Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Package Description
Additional Links
Maintainers
- Grey
Authors
A simple node that takes in a yaml file that describes a schedule for charger usage in an RMF scenario. The node will watch the clock and publish the appropriate commands to change the chargers of the robots.
The format for the schedule looks like this:
"my_fleet_name":
"00:00": { "robot_1": "charger_A", "robot_2": "charger_B", "robot_3": "queue_A" }
"01:55": { "robot_1": "queue_B" }
"02:00": { "robot_3": "charger_A", "robot_1": "queue_A" }
"03:55": { "robot_2": "queue_B" }
"04:00": { "robot_1": "charger_B", "robot_2": "queue_A" }
parking: ["queue_A", "queue_B"]
The time format is "HH:MM"
where HH
ranges from 00
to 23
and MM
ranges
from 00
to 59
. Note that quotes are important because otherwise the yaml
format may confuse the meaning of the colon :
.
The schedule will cycle every 24 hours.
For each timestamp, only robots that are explicitly mentioned will have their dedicated charger changed. It is the responsibility of the schedule file author to make sure that two robots are never assigned the same charger at the same time. Failing to ensure this may cause traffic and task management to misbehave.
When run in simulation mode (--ros-args --use-sim-time
), the time 00:00
in
the schedule will correspond to t=0.0
in simulation time.
When run without sim time on, the hours and minutes will correspond to the local
timezone of the machine that the node is run on. To choose a specific timezone
instead of using the system’s local timzeone, use the --timezone
argument and
provide the desired TZ identifier
string.
It is advisable that you always put a 00:00
entry that indicates all of
the intended charger assignments at midnight. When the node is launched, it will
move through the schedule from the earliest entry up until the last relevant one
and issue an initial charger assignment message based on what the assignments
would have been if the schedule had run from 00:00
.
If any of the waypoints are parking points instead of charging points, put them
into a list called parking
. Note that this node does not support the existence
of a fleet with the name parking
.
Changelog for package rmf_charging_schedule
2.7.2 (2024-06-18)
2.7.1 (2024-06-11)
- Fix charging status (#347)
- Contributors: Grey
2.7.0 (2024-06-01)
2.6.0 (2024-03-13)
2.5.0 (2023-12-22)
2.4.0 (2023-12-15)
- First release
Wiki Tutorials
Package Dependencies
Deps | Name |
---|---|
rclpy | |
rmf_fleet_msgs |
System Dependencies
Dependant Packages
Launch files
Messages
Services
Plugins
Recent questions tagged rmf_charging_schedule at Robotics Stack Exchange
rmf_charging_schedule package from rmf_ros2 repormf_charging_schedule rmf_fleet_adapter rmf_fleet_adapter_python rmf_reservation_node rmf_task_ros2 rmf_traffic_ros2 rmf_websocket |
|
Package Summary
Tags | No category tags. |
Version | 2.8.0 |
License | Apache License 2.0 |
Build type | AMENT_PYTHON |
Use | RECOMMENDED |
Repository Summary
Checkout URI | https://github.com/open-rmf/rmf_ros2.git |
VCS Type | git |
VCS Version | main |
Last Updated | 2024-11-12 |
Dev Status | DEVELOPED |
CI status | No Continuous Integration |
Released | RELEASED |
Tags | No category tags. |
Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Package Description
Additional Links
Maintainers
- Grey
Authors
A simple node that takes in a yaml file that describes a schedule for charger usage in an RMF scenario. The node will watch the clock and publish the appropriate commands to change the chargers of the robots.
The format for the schedule looks like this:
"my_fleet_name":
"00:00": { "robot_1": "charger_A", "robot_2": "charger_B", "robot_3": "queue_A" }
"01:55": { "robot_1": "queue_B" }
"02:00": { "robot_3": "charger_A", "robot_1": "queue_A" }
"03:55": { "robot_2": "queue_B" }
"04:00": { "robot_1": "charger_B", "robot_2": "queue_A" }
parking: ["queue_A", "queue_B"]
The time format is "HH:MM"
where HH
ranges from 00
to 23
and MM
ranges
from 00
to 59
. Note that quotes are important because otherwise the yaml
format may confuse the meaning of the colon :
.
The schedule will cycle every 24 hours.
For each timestamp, only robots that are explicitly mentioned will have their dedicated charger changed. It is the responsibility of the schedule file author to make sure that two robots are never assigned the same charger at the same time. Failing to ensure this may cause traffic and task management to misbehave.
When run in simulation mode (--ros-args --use-sim-time
), the time 00:00
in
the schedule will correspond to t=0.0
in simulation time.
When run without sim time on, the hours and minutes will correspond to the local
timezone of the machine that the node is run on. To choose a specific timezone
instead of using the system’s local timzeone, use the --timezone
argument and
provide the desired TZ identifier
string.
It is advisable that you always put a 00:00
entry that indicates all of
the intended charger assignments at midnight. When the node is launched, it will
move through the schedule from the earliest entry up until the last relevant one
and issue an initial charger assignment message based on what the assignments
would have been if the schedule had run from 00:00
.
If any of the waypoints are parking points instead of charging points, put them
into a list called parking
. Note that this node does not support the existence
of a fleet with the name parking
.
Changelog for package rmf_charging_schedule
2.8.0 (2024-06-12)
2.7.1 (2024-06-11)
- Fix charging status (#347)
- Contributors: Grey
2.7.0 (2024-06-01)
2.6.0 (2024-03-13)
2.5.0 (2023-12-22)
2.4.0 (2023-12-15)
- First release