Repository Summary
Checkout URI | https://github.com/Terabee/teraranger.git |
VCS Type | git |
VCS Version | master |
Last Updated | 2021-03-11 |
Dev Status | MAINTAINED |
CI status | No Continuous Integration |
Released | RELEASED |
Tags | No category tags. |
Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Packages
Name | Version |
---|---|
teraranger | 2.1.0 |
README
ROS package for TeraRanger modules
This package is a collection of nodes for TeraRanger single sensor modules.
- TeraRanger Evo Mini
- TeraRanger Evo Thermal 33/90
- TeraRanger Evo 64px
- TeraRanger Evo 60m
- TeraRanger Evo 40m
- TeraRanger Evo 15m
- TeraRanger Evo 3m
- TeraRanger One
- TeraRanger Duo
Link to ROS Wiki package documentation: Here
Dependencies
This package depends on this serial library. To get it, execute the following command:
sudo apt-get install ros-<your_distro>-serial
where
If it’s not available for your distribution, clone https://github.com/wjwwood/serial into your workspace, then build and source your workspace.
Installing the package
Installing from PPAs
You can install the teraranger package by running the command:
sudo apt-get install ros-kinetic-teraranger
Building and Running the package from source
To clone and build the package in your workspace follow these steps:
- If you have ssh key setup for your github account:
cd ~/ros_ws/src
git clone git@github.com:Terabee/teraranger.git
cd ~/ros_ws
catkin_make
source devel/setup.bash
- If you prefer to use https use this set of commands:
cd ~/ros_ws/src
git clone https://github.com/Terabee/teraranger.git
cd ~/ros_ws
catkin_make
source devel/setup.bash
Running the TeraRanger Evo Mini
After your workspace is built and sourced:
rosrun teraranger evo_mini _portname:=/dev/ttyACM0
This node is publishing on two topics:
- /teraranger_evo_mini/range: Range message when the sensor is in single-pixel mode
- /teraranger_evo_mini/ranges: RangeArray (from teraranger_array package) message with multiple ranges when the sensor is in multi-pixel mode
Running the TeraRanger Evo Thermal 33/90
After your workspace is built and sourced:
rosrun teraranger evo_thermal.py _portname:=/dev/ttyACM0
This node is publishing on two topics:
- /teraranger_evo_thermal/rgb_image: a color mapped RGB image based on thermal data
- /teraranger_evo_thermal/raw_temp_array: an array of 1024 raw thermal data
- /teraranger_evo_thermal/ptat: internal temperature of the sensor
Running the TeraRanger Evo 64px
After your workspace is built and sourced:
rosrun teraranger evo_64px.py _portname:=/dev/ttyACM0
This node is publishing on two topics:
- /teraranger_evo_64px/depth_image: a colormapped RGB image based on depth data
- /teraranger_evo_64px/point_cloud: a point cloud in the frame of the sensor
Running the TeraRanger Evo 60m
After your workspace is built and sourced:
rosrun teraranger evo _portname:=/dev/ttyACM0 _sensor_type:=Evo_60m
Running the TeraRanger Evo 40m
After your workspace is built and sourced:
rosrun teraranger evo _portname:=/dev/ttyACM0 _sensor_type:=Evo_40m
Running the TeraRanger Evo 15m
After your workspace is built and sourced:
rosrun teraranger evo _portname:=/dev/ttyACM0 _sensor_type:=Evo_15m
Running the TeraRanger Evo 600Hz
After your workspace is built and sourced:
rosrun teraranger evo _portname:=/dev/ttyACM0 _sensor_type:=Evo_600Hz
Running the TeraRanger Evo 3m
After your workspace is built and sourced:
rosrun teraranger evo _portname:=/dev/ttyACM0 _sensor_type:=Evo_3m
WARNING: By default, if no sensor_type is specified, the default sensor chosen is the Evo 60m
Running the TeraRanger One
After your workspace is built and sourced:
rosrun teraranger one _portname:=/dev/ttyACM0
Running the TeraRanger Duo
After your workspace is built and sourced:
rosrun teraranger duo _portname:=/dev/ttyACM0
Changing Sensor Parameters
You can change the mode of the sensors by running rqt_reconfigure:
rosrun rqt_reconfigure rqt_reconfigure
Displaying Sensor Information
When the teraranger node is running in a new terminal window execute:
rostopic list
to see list of available topics. If the teraranger node is running and the sensor is connected to your PC you should see topics starting with /teraranger.
To display the messages arriving on the topic run the following command in a terminal:
rostopic echo /teraranger_<sensor_name>
where
Product pictures and where to get the sensors
TeraRanger Evo Mini
Information |
---|
Product page |
Specification sheet |
TeraRanger Evo Thermal 33/90
Information |
---|
Product pages Evo Thermal 33 / Evo Thermal 90 |
Specification sheet |
TeraRanger Evo 64px
Information |
---|
Product page Evo 64px |
Specification sheet |
TeraRanger Evo 3m
Information |
---|
Product page Evo 3m |
Specification sheet |
TeraRanger Evo 60m/Evo 40m/Evo 15m
Information |
---|
Product pages Evo 60m / Evo 40m / Evo 15m |
Specification sheets Evo 60m / Evo 40m / Evo 15m |
TeraRanger One
Information |
---|
Product page |
Specification sheet |
TeraRanger Duo
Information |
---|
Product page |
Specification sheet |