ROS Index
No version for distro humble. Known supported distros are highlighted in the buttons above.
No version for distro iron. Known supported distros are highlighted in the buttons above.
No version for distro jazzy. Known supported distros are highlighted in the buttons above.
No version for distro rolling. Known supported distros are highlighted in the buttons above.
Repository Summary
| Checkout URI | https://github.com/InnopolisAero/uavcan_communicator.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2024-11-14 |
| Dev Status | MAINTAINED |
| CI status | No Continuous Integration |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Packages
| Name | Version |
|---|---|
| uavcan_communicator | 0.0.0 |
README
DroneCAN communicator 
It is recommended to use Cyphal communicator in new designs.
DroneCAN communicator converts DroneCAN messages to ROS and vice versa.
It covers a minimal set of sensors required for such applications as Ardupilot/PX4 DroneCAN HITL simulation. This communicator can be used for other purposes as well.
1. Conversions
The tables below represent the supported conversions:
DroneCAN->ROS
| № | Brige name | ROS msg | DroneCAN msg |
|---|---|---|---|
| 1 | RawCommandUavcanToRos | sensor_msgs/Joy | esc::RawCommand |
| 2 | ArrayCommandUavcanToRos | sensor_msgs/Joy | actuator::ArrayCommand |
| 3 | ArmUavcanToRos | std_msgs::Bool | safety::ArmingStatus |
| 4 | AhrsSolutionUavcanToRos | sensor_msgs::Imu | ahrs::AhrsSolution |
| 5 | EscStatusUavcanToRos | mavros_msgs::ESCTelemetryItem | esc::Status |
| 6 | CircuitStatusUavcanToRos | mavros_msgs::BatteryStatus | power::CircuitStatus |
ROS->DroneCAN
| № | Brige name | ROS msg | DroneCAN msg |
|---|---|---|---|
| 1 | BaroStaticTemperatureRosToUavcan | std_msgs/Float32 | air_data::StaticTemperature |
| 2 | BaroStaticPressureRosToUavcan | std_msgs/Float32 | air_data::StaticPressure |
| 3 | DiffPressureRosToUavcan | std_msgs/Float32 | air_data::RawAirData |
| 4 | GpsRosToUavcan | sensor_msgs/NavSatFix | gnss::Fix2 |
| geometry_msgs/Twist | gnss::Fix2 | ||
| 5 | ImuRosToUavcan | sensor_msgs/Imu | ahrs::RawIMU |
| 6 | MagnetometerRosToUavcan | sensor_msgs/MagneticField | ahrs::MagneticFieldStrength |
| 7 | EscStatusRosToUavcan | mavros_msgs::ESCTelemetryItem | esc::Status |
| 8 | IceReciprocatingStatusRosToUavcan | mavros_msgs::ESCStatusItem | ice::reciprocating::Status |
| 9 | IceFuelTankStatusRosToUavcan | std_msgs/UInt8 | ice::FuelTankStatus |
| 10 | BatteryInfoRosToUavcan | sensor_msgs/BatteryState | power::BatteryInfo |
2. Preparation
You need to perform the following steps to use this package:
- Clone this repository using recursive. Update submodules every time you pull this repo
- Install required packages using
install_requirements.shscript - Build libuavcan v0.1 as a static library and install it on the system globally
- (optionally) Build DSDL if you want to use custom messages
cd catkin_ws/src
git clone --recursive git@github.com:RaccoonlabDev/uavcan_communicator.git
cd uavcan_communicator
git submodule update --init --recursive
./scripts/install_requirements.sh
./scripts/install_libuavcan.sh
./scripts/compile_dsdl.sh
3. Running
- At first, you need to create a virtual can port
- Then specify in
config/params.yamlwhich conversions do you need to use - Then launch communicator typing:
Example:
roslaunch uavcan_communicator example_communicator.launch
4. Usage example
Below you can see an example of using the uavcan_communicator in conjunction with a VTOL dynamics simulator.
CONTRIBUTING
No CONTRIBUTING.md found.
No version for distro galactic. Known supported distros are highlighted in the buttons above.
Repository Summary
| Checkout URI | https://github.com/InnopolisAero/uavcan_communicator.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2024-11-14 |
| Dev Status | MAINTAINED |
| CI status | No Continuous Integration |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Packages
| Name | Version |
|---|---|
| uavcan_communicator | 0.0.0 |
README
DroneCAN communicator
It is recommended to use Cyphal communicator in new designs.
DroneCAN communicator converts DroneCAN messages to ROS and vice versa.
It covers a minimal set of sensors required for such applications as Ardupilot/PX4 DroneCAN HITL simulation. This communicator can be used for other purposes as well.
1. Conversions
The tables below represent the supported conversions:
DroneCAN->ROS
| № | Brige name | ROS msg | DroneCAN msg |
|---|---|---|---|
| 1 | RawCommandUavcanToRos | sensor_msgs/Joy | esc::RawCommand |
| 2 | ArrayCommandUavcanToRos | sensor_msgs/Joy | actuator::ArrayCommand |
| 3 | ArmUavcanToRos | std_msgs::Bool | safety::ArmingStatus |
| 4 | AhrsSolutionUavcanToRos | sensor_msgs::Imu | ahrs::AhrsSolution |
| 5 | EscStatusUavcanToRos | mavros_msgs::ESCTelemetryItem | esc::Status |
| 6 | CircuitStatusUavcanToRos | mavros_msgs::BatteryStatus | power::CircuitStatus |
ROS->DroneCAN
| № | Brige name | ROS msg | DroneCAN msg |
|---|---|---|---|
| 1 | BaroStaticTemperatureRosToUavcan | std_msgs/Float32 | air_data::StaticTemperature |
| 2 | BaroStaticPressureRosToUavcan | std_msgs/Float32 | air_data::StaticPressure |
| 3 | DiffPressureRosToUavcan | std_msgs/Float32 | air_data::RawAirData |
| 4 | GpsRosToUavcan | sensor_msgs/NavSatFix | gnss::Fix2 |
| geometry_msgs/Twist | gnss::Fix2 | ||
| 5 | ImuRosToUavcan | sensor_msgs/Imu | ahrs::RawIMU |
| 6 | MagnetometerRosToUavcan | sensor_msgs/MagneticField | ahrs::MagneticFieldStrength |
| 7 | EscStatusRosToUavcan | mavros_msgs::ESCTelemetryItem | esc::Status |
| 8 | IceReciprocatingStatusRosToUavcan | mavros_msgs::ESCStatusItem | ice::reciprocating::Status |
| 9 | IceFuelTankStatusRosToUavcan | std_msgs/UInt8 | ice::FuelTankStatus |
| 10 | BatteryInfoRosToUavcan | sensor_msgs/BatteryState | power::BatteryInfo |
2. Preparation
You need to perform the following steps to use this package:
- Clone this repository using recursive. Update submodules every time you pull this repo
- Install required packages using
install_requirements.shscript - Build libuavcan v0.1 as a static library and install it on the system globally
- (optionally) Build DSDL if you want to use custom messages
cd catkin_ws/src
git clone --recursive git@github.com:RaccoonlabDev/uavcan_communicator.git
cd uavcan_communicator
git submodule update --init --recursive
./scripts/install_requirements.sh
./scripts/install_libuavcan.sh
./scripts/compile_dsdl.sh
3. Running
- At first, you need to create a virtual can port
- Then specify in
config/params.yamlwhich conversions do you need to use - Then launch communicator typing:
Example:
roslaunch uavcan_communicator example_communicator.launch
4. Usage example
Below you can see an example of using the uavcan_communicator in conjunction with a VTOL dynamics simulator.
CONTRIBUTING
No CONTRIBUTING.md found.