Path Generator

The path_generator node receives a route from mission_planner and converts the center line into a path. If the route has waypoints set, it generates a path passing through them.

This package is a simple alternative of behavior_path_generator.

Path generation

When input data is ready, it first searches for the lanelet closest to the vehicle. If found, it gets the lanelets within a distance of path_length.backward behind and path_length.forward in front. Their center lines are concatenated to generate a path.

If waypoints exist in the route, it replaces the overlapped segment of the center line with them. The overlap interval is determined as shown in the following figure.

Path cut

If there is a self-intersection on either of the path bounds, the path is cut off a specified distance before the first intersection, as shown in the following figure (path: green, bound: blue).

Depending on the crossing angle, the return path’s bound may be closer to the centerline than the outward’s one, depicted in the diagram below. To deal with this, intersections of the left and right bounds (mutual intersection) are taken into account as well, and the path is cut at the nearest intersecting point.

Furthermore, in the case of the following figure, the return path goes inside even if mutual intersection is considered. Therefore, path cut is also made when the start edge of the path and the path bounds intersect.

Turn signal

Turn signal is determined based on the rules defined for behavior_path_planner. (See here for details)

As a general rule, the turn signal is turned on at a specified distance before the lanelet in which a turn is designated, and turned off when the driving direction has changed to the specified degree.

If consecutive turns are required, the turn signal corresponding to the required section or the last section takes precedence.

Hazard signal

This node always publishes a hazard signal of autoware_vehicle_msgs::msg::HazardLightsCommand::NO_COMMAND.

Flowchart

Input topics

Output topics

Parameters

{{ json_to_markdown(“planning/autoware_path_generator/schema/path_generator.schema.json”) }}

In addition, the following parameters should be provided to the node:

• nearest search parameters
• vehicle info parameters

Changelog for package autoware_path_generator

1.0.0 (2025-03-31)

• test(autoware_path_generator): add turn signal RequiredEndPoint position test (#323) test(autoware_path_generator): add RequiredEndPoint position test
• test(path_generator): add tests for turn signal activation feature (#253)
  • add tests
  • style(pre-commit): autofix

  * Update planning/autoware_path_generator/test/test_turn_signal.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>> ---------Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]\@users.noreply.github.com> Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>>

• fix(autoware_path_generator): remove redundant move (#318) Remove redundant move
• fix(path_generator): fix path bound generation for overlapped lanes (#285)
  • fix path bound generation for overlapped lanes
  • check for intersection between start edge of drivable area and path bounds
  • fix start edge intersection search
  • temporarily disuse autoware_trajectory
  • check intersection between start edge of drivable area and center line
  • fix get_first_self_intersection_arc_length idx
  • fix redundantInitialization

  * fix structure bindings for clang-tidy ---------Co-authored-by: kosuke55 <<kosuke.tnp@gmail.com>>

• Contributors: Kosuke Takeuchi, Mitsuhiro Sakamoto, Shane Loretz

0.3.0 (2025-03-21)

• chore: fix versions in package.xml
• chore: rename from [autoware.core]{.title-ref} to [autoware_core]{.title-ref} (#290)
• feat: adaptation to ROS nodes guidelines about directory structure (#272)
• fix(path_generator): fix path bound generation (#267) fix path bound generation
• feat(autoware_path_generator): function to smooth the path (#227) * feat: function to smooth the route (see below) Description: This commit is kind of feature porting from [autoware.universe]{.title-ref} as follows * Import [PathWithLaneId DefaultFixedGoalPlanner::modifyPathForSmoothGoalConnection]{.title-ref} from the following [autoware.universe]{.title-ref} code https://github.com/autowarefoundation/autoware.universe/blob/a0816b7e3e35fbe822fefbb9c9a8132365608b49/planning/behavior_path_planner/autoware_behavior_path_goal_planner_module/src/default_fixed_goal_planner.cpp#L74-L104
  • Also import all related functions from the [autoware.universe]{.title-ref} side
  • style(pre-commit): autofix
  • bugs: fix remaining conflicts

  * Update planning/autoware_path_generator/src/utils.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>> * Update planning/autoware_path_generator/src/utils.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>>

  • refactor: as follows
  • Enhance error handlings
  • Remove unused variables
  • Simplify the code
  • Improve readability a little bit
  • style(pre-commit): autofix
  • refactor: enhance error handling
  • style(pre-commit): autofix
  • bug: fix wrong function declaration in header
  • bug: fix wrong point index calculation
  • bug: remove meaningless comment
  • This comment is wrote because of my misunderstanding
  • fix: apply [pre-commit]{.title-ref}
  • fix: smooth path before cropping trajectory points
  • bug: fix shadow variable
  • bug: fix missing parameters for [autoware_path_generator]{.title-ref}
  • bug: fix by cpplint
  • style(pre-commit): autofix
  • bug: apply missing fix proposed by cpplint
  • style(pre-commit): autofix
  • bug: [autoware_test_utils]{.title-ref} should be in the [test_depend]{.title-ref}
  • fix(autoware_path_generator): add maintainer and author
  • style(pre-commit): autofix
  • fix: by pre-commit
  • Sorry, I was forgetting to do this on my local env.
  • fix: smooth path only when a goal point is included
  • bug: do error handling
  • style(pre-commit): autofix
  • bug: fix wrong distance calculation
  • The goal position is generally separate from the path points
  • fix: remove sanity check temporary as following reasons
  • CI (especially unit tests) fails due to this sanity check

  * As this is out of scope for this PR, we will fix the bug where the start and end are reversed in another PR

  • refactor: fix complexity
  • We should start from the simple one
  • Then we can add the necessary optimization later
  • bug: missing fixes in the include header
  • bug: inconsistent function declaration
  • The type of returned value and arguments were wrong

  * Update planning/autoware_path_generator/include/autoware/path_generator/common_structs.hpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>> * Update planning/autoware_path_generator/src/node.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>> * Update planning/autoware_path_generator/src/utils.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>> * Update planning/autoware_path_generator/src/utils.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>>

  • style(pre-commit): autofix
  • fix: apply comment in the following PR
  • https://github.com/autowarefoundation/autoware.core/pull/227#discussion_r1986045016
  • fix: sorry, I was missing one comment to be applied
  • style(pre-commit): autofix
  • bug: fix wrong goal point interpolation
  • feat: add test case (goal on left side)
  • bug: fix as follows
  • Prevent name duplication (path_up_to_just_before_pre_goal)
  • Fix missing left/right bound
  • Goal must have zero velocity
  • Improve readability
  • Other minor fixes
  • bug: fix duplicated zero velocity set
  • Zero velocity is set after the removed lines by this commit
  • feat: add one test case (goal on left side)

  * Update planning/autoware_path_generator/src/utils.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>>

  • fix: apply comment from reviewer
  • fix(package.xml): update maintainer for the following packages
  • [autoware_planning_test_manager]{.title-ref}
  • [autoware_test_utils]{.title-ref}

  * Update planning/autoware_path_generator/src/node.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>> * Update planning/autoware_path_generator/src/utils.cpp Co-authored-by: Mitsuhiro Sakamoto <<50359861+mitukou1109@users.noreply.github.com>> * Update planning/autoware_path_generator/src/utils.cpp Co-authored-by: Mitsuhiro Sakamoto <<50359861+mitukou1109@users.noreply.github.com>>

  • bug: fix missing header in the path
  • This finally causes an issue that the vehicle cannot engage
  • bug: fix an issue that smooth connection does not work
  • refactor: simplify code
  • bug: fix wrong pose at the goal (see below)

  * If we return nullopt here, the original path whose goal position is located at the center line is used. * Unless far from the goal point, the path becomes smoothed one whose goal position is located at the side of road correctly. * But as the goal approaches very closely, the goal position is shifted from smoothed one to the original one

  • Thus, the goal pose finally becomes wrong due to the goal position shift
  • refactor: no need this line here
  • style(pre-commit): autofix
  • bug: fix so we follow the provided review comments
  • bug: sorry, this is unsaved fix, ...
  • cosmetic: fix wrong comment
  • bug: unused function [get_goal_lanelet()]{.title-ref} remaining
  • bug: carefully handle the pre goal velocity
  • It seems zero pre goal velocity makes scenario fail
  • We need to insert appropriate velocity for pre goal

  * Update planning/autoware_path_generator/src/utils.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>> * Update planning/autoware_path_generator/src/utils.cpp Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>> * style(pre-commit): autofix ---------Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]\@users.noreply.github.com> Co-authored-by: Kosuke Takeuchi <<kosuke.tnp@gmail.com>> Co-authored-by: Mitsuhiro Sakamoto <<50359861+mitukou1109@users.noreply.github.com>>

• feat(path_generator): publish hazard signal (#252) publish hazard signal (no command)
• fix(path_generator): set current pose appropriately in test (#250) set start pose of route as current pose
• feat(path_generator): add turn signal activation feature (#220) * add path_generator package fix spell check error include necessary headers change package version to 0.0.0 Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> fix include guard name Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> replace flowchart uml with pre-generated image Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> style(pre-commit): autofix replace tier4_planning_msgs with autoware_internal_planning_msgs style(pre-commit): autofix use LaneletSequence instead of ConstLanelets set orientation to path points crop path bound to fit trajectory offset path bound no need to make return value optional address deprecation warning add doxygen comments support multiple previous/next lanelets fix path bound cut issue group parameters add turn signal activation feature fix turn direction check process consider required end point keep turn signal activated until reaching desired end point if without conflicts add missing parameters
  • add include
  • use trajectory class

  * minor change ---------Co-authored-by: mitukou1109 <<mitukou1109@gmail.com>>

• test(path_generator): add tests (#215)
  • test(path_generator): add tests
  • add tests
  • adapt test to new test manager
  • migrate to autoware_internal_planning_msgs

  * use intersection map for unit tests ---------fix pre-commit fix pre-commit * Update planning/autoware_path_generator/test/test_path_generator_node_interface.cpp Co-authored-by: Satoshi OTA <<44889564+satoshi-ota@users.noreply.github.com>> * fix for latest ---------Co-authored-by: Mitsuhiro Sakamoto <<50359861+mitukou1109@users.noreply.github.com>> Co-authored-by: Satoshi OTA <<44889564+satoshi-ota@users.noreply.github.com>>

• feat(path_generator): add path cut feature (#216) * feat(path_generator): add path cut feature add path_generator package fix spell check error include necessary headers change package version to 0.0.0 Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> fix include guard name Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> replace flowchart uml with pre-generated image Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> style(pre-commit): autofix replace tier4_planning_msgs with autoware_internal_planning_msgs style(pre-commit): autofix use LaneletSequence instead of ConstLanelets set orientation to path points crop path bound to fit trajectory offset path bound no need to make return value optional address deprecation warning add doxygen comments support multiple previous/next lanelets fix path bound cut issue group parameters add path cut feature ensure s_end is not negative simplify return value selection add doxygen comments
  • ignore makeIndexedSegmenTree from spell check

  * delete comments from cspell for pre-commit ---------Co-authored-by: mitukou1109 <<mitukou1109@gmail.com>>

• feat(path_generator): add path_generator package (#138)
  • add path_generator package
  • fix spell check error
  • include necessary headers

  * change package version to 0.0.0 Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> * fix include guard name Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> * replace flowchart uml with pre-generated image Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>>

  • style(pre-commit): autofix
  • replace tier4_planning_msgs with autoware_internal_planning_msgs
  • style(pre-commit): autofix
  • use LaneletSequence instead of ConstLanelets
  • set orientation to path points
  • crop path bound to fit trajectory
  • offset path bound
  • no need to make return value optional
  • address deprecation warning
  • add doxygen comments
  • support multiple previous/next lanelets
  • fix path bound cut issue
  • group parameters
  • use autoware_utils
  • test(path_generator): add tests (#1)
  • add tests
  • adapt test to new test manager
  • migrate to autoware_internal_planning_msgs

  * use intersection map for unit tests ---------

  • fix pre-commit
  • fix pre-commit

  * Revert "fix pre-commit" This reverts commit 9b3ae3e93c826f571101203f2b0defc5e238741b. Revert "fix pre-commit" This reverts commit 6a3c5312920ba4551ced5247674209318b31c657. Revert "test(path_generator): add tests (#1)" This reverts commit 7773976d3651e7e3b0b12f405f800abebfb6abe8. ---------Co-authored-by: Yutaka Kondo <<yutaka.kondo@youtalk.jp>> Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]\@users.noreply.github.com> Co-authored-by: kosuke55 <<kosuke.tnp@gmail.com>>

• Contributors: Junya Sasaki, Kosuke Takeuchi, Mitsuhiro Sakamoto, NorahXiong, Yutaka Kondo, mitsudome-r